-
tel: +86 13851019143
-
email: jade1971@163.com
-
WechatApp: Jade(+8613851019143)
Stainless steel balls all kinds of steel balls
stainless steel shot
(1) "Stainless steel shot" is the main product sold by our company. We also provide aluminum wire shot, alloy steel shot, and steel wire cut shot. Customers are welcome to purchase and our company will serve them wholeheartedly.
(2) Characteristics of stainless steel shot; long service life, short shot blasting time, less dust, bright surface without rust after processing of metal workpiece, small wear on shot blasting machine, sand blasting machine and other equipment, good fluidity, which is conducive to internal circulation, Improve work efficiency.
(3) Use of stainless steel shot; widely used in non-ferrous metal casting, motorcycle parts, auto parts, aluminum manufacturing, power tools, industrial can making, valve manufacturing, hardware products, etc.
Characteristics and application of stainless steel shot
|
Specifications
|
Applicable products |
|
Φ0.15-Φ0.2 |
Clean the cold casting die, forging die die, refurbished automobile engine supercharger pump cover, starter precision gear and spring reinforcement, stainless steel container surface spray treatment |
|
Φ0.2-Φ0.3 |
Aluminum and zinc die casting, precision casting surface cleaning, special coating front surface roughening treatment, aluminum profile removal surface extrusion lines, steel and aluminum pipe surface refinement spray, stainless steel container and valve refinement spray |
|
Φ0.3 Φ0.4 Φ0.5 |
Aluminum-zinc die cast, motorcycle engine housing, cylinder head, carburetor, engine fuel housing, intake pipe, lock.Low die-cast mold vehicle contour coating surface cleaning light.Copper and aluminum stainless steel stamping parts surface light cleaning, precision casting stainless steel parts, etc |
|
Φ0.5 Φ0.6 Φ0.7 |
The surface of aluminum and zinc die casting is cleaned light, the surface of aluminum sand mold casting is cleaned light, and the appearance of stainless steel precision parts is exquisite and self-care.Clean the surface of brass castings and larger stamping parts, and spray artificial marble. |
|
Φ0.7-Φ0.8 |
In addition to the WG40 function, stainless steel casting surface light and fine treatment.Alloy steel forging to scale treatment, artificial marble surface light finishing effect and anti-slip treatment |
|
Φ0.8 Φ1.0 Φ1.2 |
Surface depeeling of high alloy steel castings.Aluminum alloy engine body and other large die-cast parts.Clean up the whole light.Marble surface effect treatment and anti-skid treatment. |
|
>1.0 |
Oxoxide skin before exterior coating of molded steel casting., Granite material, marble steps polished anti-skid treatment. |
It is refined by wire drawing, cutting, rounding and other processes, with a bright appearance and a rust-free cylindrical shape (cut pills, cylindrical shape.). Widely used in surface spraying and polishing of aluminum, copper, zinc, stainless steel and other workpieces.
Specifications: ￠0.1 0mm- < ￠2.50mm
Stainless steel with other chemical compositions can be provided according to user needs
|
Grade of steel elementelementslic elements |
C |
Cr) |
Ni |
Mn) |
Si |
S |
P |
|
SUS304 |
≦0.07 |
17. 00-19.00 |
8.00-10.00 |
≦2.00 |
≦1 00 |
≦0.030 |
≦0.035 |
|
SUS202 |
≦015 |
13. 00-16 .00 |
3.80-5.50 |
7.50-10.00 |
≦1.00 |
≦0.030 |
≦0.035 |
|
SUS201 |
≦0.15 |
12. 00-14.00 |
1.80-3.50 |
16. 00-20.00 |
≦1.00 |
≦0.030 |
≦0.035 |
|
SUS430 |
≦0.12 |
16. 00-18,00 |
Trace |
≦1.25 |
≦;075 |
≦0.030 |
≦0,035 |
|
SUS410 |
≦0.15 |
11.50-13.50 |
Trace |
≦1.25 |
≦075 |
≦0.030 |
≦0.035 |
|
Average hardness |
310-510HV Vickers,32-SOHRC Rockwell |
|
Tensile strength |
1300-2400Mpa |
|
Irving life |
6500 Times(1.0mm, VDFl8001) |
|
Metallurgical structure |
Model304 Model202 Model201 Type: Deformed Austenite |
|
Model430 Type: Deformed Ferrite |
|
|
Model410 Type : Deformed Martensite |
|
|
Density |
7.85g/cm3 |
|
Stacking density |
4.70g/cm3 |
The appearance is bright and cylindrical. It is applied to the surface blasting treatment of aluminum, zinc or thin-walled workpieces, and has a significant whitening effect on the working surface.
Specifications: ￠0.40mm- ￠3.50mm
|
Name |
Cu |
Mg |
Mn |
Fe |
Si |
Zn |
Ti |
Al |
Cr |
|
A1070 |
0.01 |
|
|
0.15 |
0.14 |
|
|
99.70 |
|
|
A5056 |
0.10 |
4.50-5.60 |
0.05-0 .20 |
0.40 |
0 .30 |
010 |
0.15 |
allowance |
0 05-0 20 |
It is refined by wire drawing, cutting, rounding and other processes. The appearance is bright, rust-free, bead-shaped (cut pills are cylindrical). Widely used in surface blasting treatment of aluminum, copper, zinc, stainless steel and other workpieces
Specifications: ￠0.4 0mm- < ￠2.50mm
|
Content |
Fe≦0.04 |
Al≦0.03 |
Co≦0.02 |
Cu≦0.01 |
Zn≧99.9 |
Appearance is golden and bright, bead-shaped (cut pills are cylindrical). Mainly used in valves, electrical accessories, decorations
Such as finishing, strengthening, matt, color enhancement and other treatments on the surface of the workpiece.
Specifications ￠0.3 0mm- < ￠3.0mm
|
Content |
Copper 96%-99% |
Brass 58%-65% The rest: zn |
Physical Properties
|
Name |
|
Aluminum pills |
|
Zinc pills |
|
Steel shot |
|
Average hardness |
40-SOHV/100-125HV |
35-SSHV 80-1 OOHV (From the ridge degree） |
110-300HV |
|||
|
Tensile strength |
80-240Mpa |
90-120Mpa |
200-SOOMpa |
|||
|
Irving life |
6500 |
6000 |
5000 |
|||
|
Metallurgical structure |
0: |
o |
a+ l3 |
|||
|
Density |
2.7g/cm3 |
8.4g/cm3 |
8 9g/cm3 |
|||
|
Stacking density |
1 .5g/cm3 |
4.1g/cm3 |
5.1 g/cmJ |
|||
It is refined by drawing, cutting, strengthening and other processes. Produced in strict accordance with German VDF800-1994 and American SAEJ441, AMS2431 standards. The particle size of this product is uniform, and the hardness and density are highly consistent. The product hardness is: HV400-500, HV500-555, HV555-605, HV610-670, HV670-740; the particle size is from 0.2mm-2.0mm; the shape is the original shape Cut shot, roundness G1, G2, G3; service life from 3500 to 9600 cycles
|
Chemical composition |
C:0.45-0.85 |
Si:0.10-0.3 |
Mn:0.40-1.20 |
S:≦0.04 |
P≦0.04 |
Appearance black and bright, spheroidal martensite, sharp edges. Widely used in surface shot blasting cleaning of cast iron, tinplate, carbon steel and other castings and forgings
Wire cut shot is used for shot blasting machine, shot blasting equipment, shot blasting machine, shot blasting machine equipment, sand blasting machine. Sandblasting equipment. Abrasives for steel pretreatment production line, steel plate pretreatment production line, and steel structure pretreatment production line.
Specification. ￠0.3 0mm- < ￠3.0mm
|
Name |
C |
Mn |
Si |
S |
P |
Cr |
N1 |
|
Cast steel balls |
0.70-1.25 |
0.60-1 20 |
0.40-1 20 |
<0.05 |
<0.05 |
<0.25 |
<0.25 |
|
Cast steel sand |
0.70-1.25 |
0.60-1.20 |
0.40-1.20 |
<0.05 |
<0.05 |
<0.25 |
<0.25 |
|
Wire cutting pills |
0 45-0.85 |
0.40-1.20 |
0.10-0.30 |
<0.04 |
<0.04 |
<0.25 |
<0.25 |
Related Products
CONTACT US
Contact US
Product Information
Quantity
Unit
Piece
Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.